Call Toll Free 1-877-410-6994 or Fax 972-272-7208

Technology Furniture - Teaching Carrel II

Click on any photo to enlarge!

Print this page!

Teaching Carrel II modular computer desk dimensions

Teaching Carrel II
Dimensions

Overall:
30"D x 37 1/2"W x 42"H

Work Surface: 26 1/2" high

Freight Class:
Shipping Location:

70
75042

MODEL NUMBERS

01900 Starter (Overall width: 37 1/2") Weight: Cube:	135 5.09
01901 Adder (Overall width: 36 1/2") Weight: Cube:	98 5.09

Click on any photo to enlarge!

Print this page!

Teaching Carrel II modular computer workstation in Solar Oak and Sand finish

Shown: Model 01900 Starter with 01901 Adder Unit in Solar Oak with Sand Powder Coat Paint

• 26 1/2"H x 1" thick rectangular work surface

• Nickel plated steel 1" adjustable glides

• 1" thick end panels measure 30"D x 42"H

• 3" wiring grommets in work surface and side panels

• (Standard) Equipment Locking Wire Managment Access Tray can be mounted to face front or rear as needed

Shown: Model 01900 Starter with 01901 Adder Unit with optional 01830 CPU Holder in Solar Oak with Sand Powder Coat Paint

Uniquely Different from the original "Teaching Carrel I"

• Smaller size for tighter spaces

• Rectangular work surface 29 1/2"D x 35 1/2"W (see fig. 2 above right)

• Locking front or rear panel door is now standard equipment to provide hassle free access to cords and cables

• Optional plexiglas back panel reduce sound distractions - available for both Teaching Carrels

Color Choices


Solar Oak w/ Sand Metal	Grey Nebula w/ Light Grey Metal
*Actual colors may vary*

Product Specifications - Teaching Carrel II

Surface and Panels

Are 1" thick solid core construction in low glare melamine laminate with matching 2mm PVC edge banding. End panels are 42" high, top of panel is 15 1/2" above the work surface. Work surface is rectangular, 29 1/2"D x 35 1/2"W. The unit is standard with an 18-gauge steel forward or rear facing wire management modesty panel tray, 8"H x 4 1/4"D x full width, with a 16-gauge steel locking cable door. Cables and wiring are managed via five cable entrances. 3" diameter grommets are provided in each of the end panels and work surface. Optional 18-gauge steel CPU holder is available. All steel components are finished with baked on epoxy powder paint. Equipped with four nickel-plated steel adjustable 1" glides. Ships ready to assemble.