| Call Toll Free 1-877-410-6994 or Fax 972-272-7208 |
| Pedestal Base Study Carrels |
![]() Shown: 01700C Pedestal Base Carrel |
Overall: Adjustable height |
CARREL
ACCESSORIES (For
all carrels) |
| Accessories | Model No. | Wt. | Cube |
| 6 Outlet Surge Protected Power Strip | 01650 | 2 | .10 |
| Fluorescent Light Fixture 15 watt | 01651 | 4 | .16 |
| Wire Management Tray / Black 3"D x 5"H x 32"W | 01654 | 7 | .36 |
|
Wire management tray available for all carrel models (black powder coated only) |
COLOR
CHOICES |
Specify |
Panels & Shelf | Work Surface | Rail System/ Upper Ped | T-Ped Legs |
| A | OAK | SAND | SAND | CHROME |
| B | WALNUT | SAND | SAND | CHROME |
| C | GREY SPEKTRUM | GREY SPEKTRUM | BLACK | CHROME |
| E | OAK | OAK | BLACK | CHROME |
![]() |
![]() |
![]() |
| Medium Oak | Walnut | Grey Spektrum |
| Actual colors may vary | ||
| Product Specifications - Pedestal Base Series |
Surface and Panels |
|
| Are 3/4" thick solid core construction in low glare melamine laminate with PVC edge banding. Includes 7 1/2" deep x 35 1/2" wide shelf. Panels feature special fastners for strong, easy assembly. Work surface includes a wiring grommet in the back left corner. Panels are 21 1/8" high, top of panel is 17 1/2" above the work surface. | |
| Frame | |
| Consists of full-perimeter rail system. Rails are 14-gauge formed steel, 1 3/4" high, with baked-on epoxy powder finish. | |
| Adjustable Pedestal | |
| Upper receivers are formed from 14-gauge steel into a 1 1/4" x 2 1/4" rectangle x 12" long and mig welded. A 12-gauge gusset is formed and mig welded to this receiver tube to accept the stabilizer bar. This receiver is then mig welded into the full-perimeter rail system, which serves to stabilize the unit. A 1 1/4" square x 16-gauge steel tube stabilizer bolts between the upper pedestals 6" below the work surface with four 3/8" bolts and nuts. All of the parts above are finished with baked on epoxy powder. Chrome plated bases are manufactured from 1 x 2 x 16-gauge cold rolled tubing. The 2" horizontal mig welded joint between the vertical and horizontal tube is to be ground flat and polished smooth before chrome plating. Glides are 1 3/8" nickel plated adjustable height with nylon base. Ships ready to assemble. | |
|